Frequently asked questions
Air source heat pump FAQs
Short answers to the questions homeowners ask most about air source heat pumps, retrofit and cleaning the existing system. Every answer uses only facts found elsewhere on this site, and each links to a page with more detail.
Select a question to open its answer. If yours is not here, the glossary may help with unfamiliar terms, or you can send it to the moderated community questions page.
Questions and answers
Do I need to clean my radiators and pipework before a heat pump is fitted?
Yes. Old system water often contains sludge, magnetite and debris, which can restrict flow through radiators, pipework and the heat pump’s heat exchanger and filters. The system should be professionally cleaned and flushed before the heat pump is connected, as set out in BS 7593.
Will a heat pump use my existing radiators?
Most air source heat pumps in the UK are fitted to existing homes and connected to the existing radiators and pipework. Some radiators may need to change, which your installer’s survey should explain.
Which cleaning method should my installer use?
BS 7593 describes three methods: powerflushing, mains pressure cleaning and gravity cleaning. Ask your installer which method they will use for your system and why, and ask for it to be recorded.
How much is the Boiler Upgrade Scheme grant?
Grants such as the Boiler Upgrade Scheme change over time, so we do not quote figures. Always check the current amount and eligibility on GOV.UK.
How does an air source heat pump heat my home?
An air source heat pump takes heat from outside air and transfers it into the home’s heating and hot water system. It is designed to run at lower flow temperatures than most gas boilers, for longer periods.
Are most heat pump installations in existing homes?
The government’s heat pump deployment statistics cover installations in existing properties (retrofit). In 2026 up to the end of Q2, 99% of retrofit heat pump installations in UK homes were air-to-water heat pumps (up from 93% for the same period in 2021). Source: DESNZ, Heat pump deployment statistics: June 2026.
What is BS 7593?
BS 7593 is the British Standard code of practice for preparing, commissioning and maintaining domestic central heating and cooling water systems. It covers water treatment against scale and corrosion, cleaning and flushing of systems, and the use of in-line filters.
Does BS 7593 apply to heat pumps or only to boilers?
The current version is BS 7593:2019+A1:2024. Industry guidance confirms it applies whether a system is powered by a boiler or a heat pump.
What is MIS 3005?
MIS 3005 is an MCS installation standard for heat pumps. Building Regulations Approved Document L (para 8.7) says heat pump heating and hot water systems should be commissioned to MCS standard MIS 3005.
What should appear on my commissioning record?
The Heat Pump Association’s air source heat pump commissioning checklist asks the installer to confirm “System Flushed & Cleansed (as BS 7593)”, “System purged of air”, inhibitor added and an in-line filter fitted. Ask your installer for the commissioning record at handover.
What is magnetite?
Magnetite is a black iron oxide sludge that forms when steel radiators and iron components corrode inside a wet heating system. It is one of the things a professional clean aims to remove.
Does the heat pump manufacturer have its own water requirements?
Always check the heat pump manufacturer’s installation manual and warranty terms for their water-quality requirements, and ask your installer to confirm they have been met.
Can I ask the Heat Pump Forum a question?
Yes. Questions sent through the community page are stored privately for the site owner to review. Nothing is published unless the owner approves it and adds an answer.
Is the Heat Pump Forum connected to any trade body or manufacturer?
No. The Heat Pump Forum is an independent information site. It is not affiliated with the former Heat Pump Federation, Heat Pump Association UK, MCS or any manufacturer.
About these answers
These answers are deliberately brief. They are general information for UK homeowners, not advice on any particular home or system. Where a fact or figure appears, it is taken word for word from the sources listed at the bottom of this page.
For the full picture, the most useful next reads are the system cleaning guide, which explains why the existing heating water matters so much, and the homeowner step-by-step guide, which puts each question in the order you are likely to meet it. Installers may prefer the preparation guide for installers.
If anything here looks out of date or unclear, please tell us through the contact page. Standards are revised and schemes change, and we would rather correct a page than leave it wrong.
Sources
- F1DESNZ, Heat pump deployment statistics: June 2026 (opens in a new tab)
- F3English Housing Survey figure, as reported by Which? Trusted Traders (opens in a new tab)
- F5BSI Knowledge, BS 7593 (opens in a new tab)
- F6ACR Journal on HHIC/HPA guidance (opens in a new tab)
- F7Registered Gas Engineer summary of BS 7593:2019 (opens in a new tab)
- F8Registered Gas Engineer summary of BS 7593:2019 (opens in a new tab)
- F9HPA air source heat pump commissioning checklist (opens in a new tab)
- F10GOV.UK, Apply for the Boiler Upgrade Scheme (opens in a new tab)
Last reviewed: . Checked against the sources listed on this page; this is not an independent technical or professional review.
Keep reading
Before anything is connected