Heat pump retrofit
Fitting a heat pump to an existing heating system
Most air source heat pumps in the UK go into homes that already have radiators and pipework. Here is why retrofit is the norm, what usually stays, what may change, and why the water already in your system deserves attention first.
Why retrofit is the normal case
“Retrofit” simply means adding something to a building that already exists. For heat pumps, it means fitting one to a lived-in home rather than designing it into a new build. The published figures make it clear that this is where most UK heat pumps go, and that the air-to-water kind dominates.
99%
of retrofit heat pump installations, 2026 to end of Q2, were air-to-water
In 2026 up to the end of Q2, 99% of retrofit heat pump installations in UK homes were air-to-water heat pumps (up from 93% for the same period in 2021).
86%
of English households used gas-fired main heating in 2023-24 (around)
Around 86% of English households used gas-fired main heating in 2023-24 — so most future heat pumps will replace a boiler on an existing wet heating system.
It is worth knowing what the government numbers do and do not cover, so you can read them fairly:
The government statistics cover heat pumps installed in existing properties (retrofit). They do not include new-build installations or retrofit installations that are not MCS certified.
The market is also growing. The Heat Pump Association UK publishes sales figures:
Over 125,000 heat pumps were sold in the UK in 2025, a 27% increase on the year before.
Put together, these figures point to the same picture: a growing number of heat pumps being connected to homes that were built around boilers. If you want the background on how the equipment itself works, start with our plain-English explainer.
What usually stays
In most retrofit installations, much of the existing “wet” heating system is kept:
- Pipework. The pipes running under floors and through walls usually remain in place.
- Many radiators. Radiators that suit the lower flow temperatures a heat pump is designed to run at can often stay.
- The water already in the system, unless it is drained, cleaned and refilled. This is the part people most often forget.
Keeping the existing pipework is sensible and avoids disruption. It also means the new heat pump will be connected to whatever is inside those pipes. That is why the condition of the system water is a central question on any retrofit job.
What may change
Every home is different, and only a proper survey can say what your home needs. Things that commonly come up include:
- Some radiators. Because a heat pump is designed to run at lower flow temperatures than most gas boilers, for longer periods, some rooms may need a larger radiator to stay comfortable.
- The hot water cylinder. Heat pumps usually heat stored hot water, so a suitable cylinder is needed.
- Controls. New controls are normally fitted to suit the way a heat pump runs.
- Filters and water treatment. An in-line filter and correctly dosed inhibitor are part of preparing the system.
- Some pipework. Sections may be changed where flow needs to improve.
Ask your installer to explain each proposed change in writing, and what would happen if it were left out. Our homeowner guide has a checklist of questions you can use.
The water in the pipes
A heating system that has run on a boiler for years has had plenty of time to gather sludge, magnetite and debris. Sludge and debris in an old system can restrict flow through radiators, pipework and the heat pump’s heat exchanger and filters. When the new heat source is designed around steady, lower-temperature flow, you want that flow to be as unrestricted as possible from day one.
That is why the system must be professionally cleaned and flushed before the heat pump is connected, as set out in BS 7593, the British Standard code of practice for domestic heating water systems. The system cleaning guide explains what that means in practice, and the cleaning methods page describes the three approaches the standard sets out.
Always check the heat pump manufacturer’s installation manual and warranty terms for their water-quality requirements, too. These can be specific, and it is reasonable to ask your installer to confirm they have been met.
Grants and costs
We deliberately do not publish prices or grant amounts. They vary from home to home and change over time.
Grants such as the Boiler Upgrade Scheme change over time — always check the current amount and eligibility on GOV.UK.
When comparing quotes, look at what is included as well as the total. A quote that clearly describes how the existing system will be cleaned, flushed, treated and filtered is giving you useful information.
Sources
- F1DESNZ, Heat pump deployment statistics: June 2026 (opens in a new tab)
- F2DESNZ, Heat pump deployment statistics: June 2026 (opens in a new tab)
- F3English Housing Survey figure, as reported by Which? Trusted Traders (opens in a new tab)
- F4Heat Pump Association UK, statistics (opens in a new tab)
- F10GOV.UK, Apply for the Boiler Upgrade Scheme (opens in a new tab)
Last reviewed: . Checked against the sources listed on this page; this is not an independent technical or professional review.
Keep reading
Before anything is connected