Heat pump glossary
Heat pump glossary: terms explained
The words you will meet when reading about heat pumps, quotes and commissioning, explained in a sentence or two. These are general definitions; where a term is tied to a standard, we use the standard’s own description.
- Air source heat pump (ASHP)
- A device that takes heat from outside air and transfers it into the home’s heating and hot water system. See how air source heat pumps work.
- Air-to-water
- A heat pump that collects heat from air and delivers it into water, which then circulates through radiators and a hot water cylinder.
- BS 7593
- The British Standard code of practice for preparing, commissioning and maintaining domestic central heating and cooling water systems. It covers water treatment against scale and corrosion, cleaning and flushing of systems, and the use of in-line filters. See standards.
- Buffer tank
- A tank of heating water that some systems include to store heat and help the heat pump run steadily. Whether one is needed depends on the system design.
- Commissioning
- The checks, settings and records made when a system is first put into service, to confirm it is installed and set up correctly.
- Commissioning record
- The completed paperwork from commissioning. Homeowners should ask for a copy at handover.
- COP (coefficient of performance)
- A measure of how much heat a heat pump delivers compared with the electricity it uses, at a particular set of conditions. Higher means more heat for the same electricity.
- Cylinder (hot water cylinder)
- An insulated tank that stores hot water for taps and showers. Heat pumps usually heat stored water rather than heating it instantly.
- Flow temperature
- The temperature of the water leaving the heat source and flowing to the radiators. Heat pumps are designed to run at lower flow temperatures than most gas boilers, for longer periods.
- Gravity cleaning
- One of the three BS 7593 cleaning methods, using the system’s own circulating pump. See cleaning methods.
- Inhibitor
- A chemical treatment added to heating water to help protect the system against corrosion and scale.
- In-line filter
- A filter fitted into the heating pipework, often using a magnet, to collect debris such as magnetite as water circulates. It needs periodic cleaning.
- Magnetite
- A black iron oxide that forms when steel and iron parts corrode inside a heating system. It makes up much of the dark sludge found in older systems.
- Mains pressure cleaning
- One of the three BS 7593 cleaning methods, using the pressure of the mains water supply to flush the system.
- MCS
- The Microgeneration Certification Scheme, which certifies small-scale renewable installations and installers in the UK and publishes installation standards. See the MCS website (opens in a new tab).
- MIS 3005
- The MCS standard for heat pump systems. Building Regulations Approved Document L (para 8.7) says heat pump heating and hot water systems should be commissioned to it.
- Outdoor unit
- The part of an air source heat pump that sits outside, containing the fan and components that gather heat from the air.
- Powerflush
- One of the three BS 7593 cleaning methods, using an external pump and tank. The word is often used loosely for any system clean.
- Purging air
- Removing trapped air from a heating system after it has been filled.
- Retrofit
- Fitting a heat pump to an existing home, usually connecting it to existing radiators and pipework. See retrofit.
- SCOP (seasonal coefficient of performance)
- Like COP, but averaged over a heating season rather than measured at a single set of conditions, giving a broader picture of efficiency.
- Sludge
- The build-up of corrosion products and debris inside a heating system. It can restrict flow through radiators, pipework and the heat pump’s heat exchanger and filters. See system cleaning.
- Volumiser
- A vessel added to the heating circuit to increase the amount of water in the system, which some heat pump designs need for steady operation.
- Weather compensation
- A control approach that adjusts the flow temperature according to the outside temperature, so the system runs only as warm as it needs to.
- Wet heating system
- A heating system that uses water circulating through pipes and radiators (or underfloor pipes) to carry heat around the home.
Using this glossary
If a quote or a commissioning record uses a term you do not recognise, it is always fine to ask the installer to explain it. You can also read the FAQ or ask on the community questions page. For the topic this site cares most about, start with why to clean your heating system before a heat pump.
Sources
Last reviewed: . Checked against the sources listed on this page; this is not an independent technical or professional review.
Keep reading
Before anything is connected