Why do heat pump manufacturers care about water quality?
The water side of a heat pump includes a plate heat exchanger with narrow channels, a circulating pump, sensors and often a strainer or filter. Sludge, magnetite and scale can restrict flow through these parts, cause wear, reduce heat transfer and, in some circumstances, contribute to damage. Manufacturers design and test their products on the assumption that the system water is clean and properly treated.
Because so many heat pumps are retrofitted onto old systems, manufacturers have a clear interest in installers preparing those systems properly. That is why water quality and system preparation commonly feature in installation instructions and warranty documents.
What do heat pump warranty conditions say about system cleaning?
That depends entirely on the manufacturer, the product and the warranty version that applies to your installation. Terms also change over time, and extended warranties may carry different conditions from the standard one. We do not state any brand's warranty terms here.
If you want to know what your warranty says about cleaning, filtration, inhibitor or water testing, read the document itself or ask the installer to show you: [CHECK: brand warranty wording + source link]. Manufacturer websites are a starting point, for example Vaillant, Mitsubishi Electric, Daikin, Samsung and LG.
Is sludge damage covered by a heat pump warranty?
We cannot answer that for any specific brand. As a general principle, warranties are usually about defects in the product rather than problems caused by the system it is connected to, but the exact position is set by each manufacturer's terms: [CHECK: brand warranty wording + source link].
In practice, a dispute about a water-related fault can be stressful. Clear evidence that the system was properly cleaned and protected before connection puts you in a stronger position, even though no one can guarantee the outcome.
What should you ask your installer about warranty and cleaning?
Before the installation, ask:
- Which manufacturer warranty applies, and for how long? [CHECK: brand warranty wording + source link]
- What does it say about system cleaning, water treatment and filtration?
- Do I need to register the product, and who does that?
- How will the existing system be cleaned, by whom and by what method?
- Will a magnetic filter and inhibitor be fitted, and which ones?
- Will water quality be tested before handover, and will I get the result?
- Are annual services required to keep the warranty valid?
- What records will I receive at handover?
What records should you keep after a system clean?
Keep a simple folder, paper or digital, with:
- The installer's quotation and design, including pipe and radiator decisions.
- The cleaning record: date, who did it, what method was used and any observations.
- Details of the filter and inhibitor fitted, and dosing information if provided.
- Any water test results.
- The commissioning record and MCS certificate if applicable.
- Warranty registration confirmation and terms.
- Service records, including filter cleaning and water checks.
If a fault appears later, those documents help your installer and the manufacturer understand the history of the system.
How do BS 7593 and MCS relate to warranty conditions?
BS 7593 is the British Standard code of practice for preparing, commissioning and maintaining domestic central heating water systems. MCS publishes the standards certified heat pump installers work to. Manufacturer warranties may or may not refer to either. We do not reproduce their requirements; see BS 7593 and heat pumps explained and the MCS standards library: [CHECK: MCS wording + source link].
Do extended heat pump warranties have extra conditions?
Some manufacturers and installers offer longer warranties, sometimes linked to registration, approved installers or annual servicing. Any extra conditions are set out in those documents and can differ from the standard warranty: [CHECK: brand warranty wording + source link]. Read them before installation, not after a fault. If servicing is required, diarise it and keep every service record with your cleaning and commissioning paperwork.
Who should you call about a warranty fault?
If your heat pump has a fault and is under warranty, contact your installer first, then the manufacturer if needed. Do not let anyone else open or repair the unit without checking, as that could cause problems with the warranty. PowDer Flush is a central heating system cleaning service. We do not carry out warranty repairs on heat pumps.
Where testing shows dirty water is behind a fault, cleaning may form part of the fix, and we are happy to talk that through with you and your installer. We recommend PowDer Flush for pre-install cleaning; read before you install for the full process.
Frequently asked questions
Can sludge void a heat pump warranty?
It depends on the manufacturer's terms, which we do not state: [CHECK: brand warranty wording + source link]. Ask your installer to show you the conditions.
Do heat pump warranties require a power flush?
Some manufacturer documents may refer to system cleaning. Check your own terms: [CHECK: brand warranty wording + source link].
What heat pump warranty conditions should I check?
Registration, servicing, water quality, filtration, inhibitor and who may work on the unit. Ask your installer for the current document.
Does a cleaning certificate guarantee my warranty?
No one can guarantee a warranty outcome. A documented clean helps show the system was properly prepared.
Should I call PowDer Flush for a warranty repair?
No. Contact your installer or manufacturer. PowDer Flush handles central heating system cleaning, not heat pump repairs.
Talk to PowDer Flush before you fit a heat pump
Planning a heat pump on an older system, or chasing a fault on a recent install? Call PowDer Flush for straightforward advice about cleaning the system first. Read our before you install guide for the full picture.
Related pages
Before You Install
Why an old system should be properly cleaned before a heat pump is connected.
Read moreBS 7593 and heat pumps
What BS 7593 is in general terms, why it matters, and how a pre-install clean fits in.
Read moreWater treatment and inhibitor
What inhibitor does, testing water quality, antifreeze approaches in general terms, and why inhibitor alone is not a clean.
Read moreFaults by brand
Independent, general fault guidance for Vaillant aroTHERM, Mitsubishi Ecodan, Daikin Altherma, Samsung and LG owners.
Read more