What does an air source heat pump outdoor unit look like?
The outdoor unit is the part most people picture. It is a rectangular metal casing, usually in white, grey or a dark finish, with one or two circular fan grilles on the front. The back and sides have a large finned coil that air is drawn through. Pipes and cables run from the unit to the house, usually close to ground level.
Sizes vary with the heat output and the manufacturer. A unit for a typical home is often roughly the size of a large suitcase standing on its side up to the size of a small chest of drawers. Larger homes may need a bigger or wider unit. [CHECK: typical outdoor unit dimension range, with source].
Where does the outdoor unit usually go, and how much clearance does it need?
Common locations are a side or rear wall, a corner of the garden, or a flat area near the back of the house. The unit needs space around it for air to flow in and out freely, room for an engineer to service it, and a way for condensate and defrost water to drain away safely without creating ice on paths.
Each manufacturer specifies minimum clearances, which the installer must follow. [CHECK: typical clearance distances, from manufacturer guidance]. The installer should also consider noise for you and your neighbours, and whether the location meets permitted development or needs planning permission. [CHECK: current permitted development rules, link to GOV.UK planning guidance].
Avoid boxing the unit in or growing plants over it, as restricted airflow reduces performance and can increase icing. If you notice heavy icing or new noises, see noise and defrost.
What does a heat pump look like inside the house?
Inside, there is no boiler on the wall. Instead you will usually find a group of parts, often together in an airing cupboard, utility room or loft:
- Hot water cylinder. A tall insulated tank that stores hot water. Most heat pump installations need one.
- Controller. A wall-mounted screen or panel, sometimes with room thermostats or an app, used to set temperatures and schedules.
- Hydraulic parts. Pumps, valves, an expansion vessel and pipework. On some systems these sit inside an indoor unit; on others they are fitted on the wall.
- Filter or strainer. Catches debris from the heating water to protect the heat pump. It needs checking and cleaning periodically.
- Buffer tank, if fitted. A smaller tank that holds extra heating water. Not every system has one; the designer decides based on the system.
- Indoor unit on split systems. On a split system, refrigerant pipes run to an indoor unit containing the heat exchanger. See monobloc vs split.
The indoor equipment needs more room than a combi boiler, so planning the cylinder location early is important. The pipes connecting these parts to your radiators are usually the existing ones, which is why their condition matters. Sludge in an old system can quickly clog the filter and restrict flow; see low flow rate and before you install.
What does a ground source heat pump look like?
A ground source heat pump has no outdoor fan unit. The main unit sits indoors and is usually about the size of a large fridge or washing machine, often with the cylinder beside it or built in. Pipes run from it through the wall to the ground loop.
Outside, there is very little to see once the work is finished. Horizontal loops are buried in trenches under a lawn or field; boreholes may leave only a small cover or manifold chamber. During installation, though, there will be visible groundwork. See how a ground source heat pump works.
How can I plan where everything will go?
Before a survey, walk around the outside of the house and note possible spots for an outdoor unit, away from bedroom windows where you can. Inside, look for space for a cylinder, such as an existing airing cupboard or utility area. Your installer will confirm what works. Our guides what is a heat pump? and how much does a heat pump cost? will help you prepare questions.
Frequently asked questions
How big is an air source heat pump?
It varies with output and model. A typical home unit is roughly suitcase to chest-of-drawers sized. [CHECK: typical outdoor unit dimension range]. Ask the installer for the exact dimensions.
Can a heat pump go at the front of the house?
Sometimes, but planning rules and neighbour considerations may apply. Check current permitted development guidance on GOV.UK and ask your installer.
Does a heat pump need a hot water cylinder?
Most do, because heat pumps heat and store water rather than heating it instantly.
What is a buffer tank?
A small tank holding extra heating water, used in some designs to help the system run smoothly. Not every installation needs one.
Can I hide or cover my heat pump outdoor unit?
Only with care. Covers or screens must not restrict airflow or service access, and must follow the manufacturer's clearances. Ask your installer before adding anything.
Talk to PowDer Flush before you fit a heat pump
Planning a heat pump on an older system, or chasing a fault on a recent install? Call PowDer Flush for straightforward advice about cleaning the system first. Read our before you install guide for the full picture.
Related pages
Before You Install
Why an old system should be properly cleaned before a heat pump is connected.
Read moreAir source heat pumps
The outdoor unit, cylinder and radiators, monobloc vs split, and what a retrofit involves.
Read moreWhat is a heat pump?
What a heat pump does, the main types, and how it differs from a gas boiler.
Read moreHeat pump disadvantages
An honest list of the downsides, and how to reduce or avoid each one.
Read more