Vaillant aroTHERM problems
Identify your exact model, write down symptoms properly and work out whether it is an installer call or a cleaning enquiry.
Read the guide 02Mitsubishi Ecodan problems
Intermittent low flow, building a symptom history and why service and handover records matter.
Read the guide 03Daikin Altherma problems
Separating space-heating from hot-water complaints, and what room and radiator observations tell an engineer.
Read the guide 04Samsung problems
Cold-weather worries: normal defrost versus persistent lack of heat, and why frost protection needs a professional.
Read the guide 05LG problems
Uneven warmth between rooms, radiator circulation, and why unsupported temperature changes can backfire.
Read the guideWhy have brand-specific fault pages?
People naturally search for help using the name on their heat pump. If your controller shows a fault, you want guidance that feels relevant to your unit. Our brand pages answer that need, but they do so honestly: the underlying causes of most problems are shared across all makes, and the most important specific information, such as fault code meanings and warranty terms, must come from the manufacturer.
We do not repair heat pumps, we are not an approved service agent for any brand, and our phone line is for central heating system cleaning by PowDer Flush only, not general heat pump technical support or repairs.
What faults are common across all heat pump brands?
Whatever the make, the issues we hear about most are:
- Low flow errors, usually caused by sludge, blocked strainers or filters, closed valves, air or restricted pipework. See low flow rate.
- Not heating properly, from controls, weather compensation, undersized or sludged radiators, or poor balancing. See cold radiators and poor heat.
- Short cycling, starting and stopping frequently. See short cycling.
- Noise and defrost questions, many of which are normal behaviour. See noise and defrost.
- Pressure loss and air. See pressure loss and air.
- Error codes, which mean different things on different models. See error codes.
Is it the heat pump or the heating system?
This is the most useful question to ask. A heat pump is one part of a system that also includes radiators, pipework, valves, filters, controls and the water inside them. Most UK heat pumps are retrofitted onto existing systems, and many of those systems carry years of sludge and magnetite. When a well-made heat pump is connected to a dirty or restricted system, it can show faults that have nothing to do with its own build quality.
Signs that point to the system include radiators cold at the bottom, black water when bleeding, a magnetic filter that keeps filling and low flow errors that ease after a strainer is cleaned. Read sludge and magnetite for more.
Why do we not list heat pump error codes?
Fault codes vary between manufacturers, models, generations and controllers. A list copied from one version can be wrong for another, and acting on a wrong meaning can waste time or cause harm. On every brand page, codes appear only as placeholders such as [CHECK: error code and meaning from manufacturer manual], to be filled from official documentation. Always use the manual for your exact model.
What can owners of any brand safely check?
Safe checks are the same whatever the brand:
- Write down any code exactly and photograph the display.
- Check schedules, modes and target temperatures.
- Check the system pressure gauge against your installer's normal reading.
- Make sure radiator valves are open.
- Keep the outdoor unit clear, without removing covers.
- Bleed radiators only as your installer has shown you.
Never open a heat pump, touch refrigerant parts or work on electrics. Those jobs need F-Gas and electrical qualifications.
Who should you call about a heat pump fault?
Your installer first, especially if the unit is under warranty. If you cannot reach them, contact the manufacturer through its official UK website. Warranty repairs belong with the installer or manufacturer. Warranty terms vary and we do not state them: [CHECK: brand warranty wording + source link].
If your installer finds that dirty system water or blocked pipework is behind the fault, that is where we can help. PowDer Flush provides central heating system cleaning, with microbore as a specialism. See PowDer Flush and cleaning microbore pipes.
What if your heat pump brand is not listed?
The general guidance on this page applies to any make. Start with the fault guides linked above, use the manual for your exact model, and contact your installer for anything beyond the safe checks. If you think the heating system itself is the problem, read common microbore heating problems and magnetic filter and strainer problems. We may add more brand pages over time.
How can brand-independent faults be prevented?
Good design, careful commissioning and a clean system. If you have not yet had your heat pump fitted, the single most effective thing you can do on the water side is to have the existing system properly cleaned before connection and protected afterwards. Read before you install and heat pump warranties and system cleaning.
Frequently asked questions
Is this site connected to any heat pump manufacturer?
No. Heat Pump Faults is independent and is not affiliated with, endorsed by or connected to any manufacturer.
Which heat pump brands do you cover?
Currently Vaillant aroTHERM, Mitsubishi Ecodan, Daikin Altherma, Samsung and LG, with general guidance that applies to other makes too.
Can you tell me what my error code means?
No. Codes differ by model, so use the manual for your exact unit or ask your installer.
Can I call your number for heat pump repairs?
No. The number is for central heating system cleaning by PowDer Flush only, not general heat pump technical support, repairs or manufacturer support.
Are heat pump faults usually the unit or the system?
On retrofits, many faults come from the system: sludge, blocked strainers and restricted pipework. Your installer can help tell the difference.
Talk to PowDer Flush before you fit a heat pump
Planning a heat pump on an older system, or chasing a fault on a recent install? Call PowDer Flush for straightforward advice about cleaning the system first. Read our before you install guide for the full picture.
Related pages
Before You Install
Why an old system should be properly cleaned before a heat pump is connected.
Read moreAll heat pump faults
A guide to the most common air source heat pump faults: low flow, cold radiators, short cycling, pressure loss, noise, defrost and error codes.
Read moreSludge and magnetite
What magnetite is, where it comes from, black water, cold radiators, low flow errors and how it is removed.
Read moreCommon microbore heating problems
Blockages, sludge, cold radiators, noisy pipes and poor circulation: why small-bore pipes block and how to spot it.
Read more