Looking for the Heat Pump Federation? The Heat Pump Federation has merged into Heat Pump Association UK (HPA UK). This website is independent and is not connected to the Heat Pump Federation or HPA UK. Find out more

Heat pump guides

What are the disadvantages of a heat pump?

The main disadvantages of a heat pump are a higher upfront cost than a boiler, the need for space for an outdoor unit and a cylinder, lower flow temperatures that may mean bigger radiators, some noise from the outdoor unit, and poor performance if the system is badly designed or the existing pipework is dirty. Most of these can be reduced with good design and preparation.

Every heating system has downsides. Here are the honest ones for heat pumps, with what you can actually do about each.

Are heat pumps expensive to install?

Yes, the upfront cost is usually higher than replacing a boiler like for like. You are paying for the unit, often a new cylinder, some radiator and pipework changes, and more design work. [CHECK: typical installed cost range].

How to reduce it: check whether you are eligible for a grant (see who is eligible for a heat pump grant), get several itemised quotes, and time the change for when your boiler needs replacing anyway. Improving insulation first can reduce the size of unit and the number of radiator changes needed. Our heat pump cost guide lists the items to compare.

Does a heat pump take up a lot of space?

It needs more space than a combi boiler. Outside, an air source unit needs a spot with clearance for air to flow and room for servicing. Inside, most systems need a hot water cylinder, and some also need a buffer tank or extra hydraulic parts. For homes that currently have a combi and no airing cupboard, finding room for a cylinder can be the hardest part.

How to reduce it: ask the installer early about options for cylinder location, such as a loft, utility room or under-stairs cupboard where suitable. Our guide on what a heat pump looks like shows the parts involved so you can plan ahead.

Why do radiators feel cooler with a heat pump?

Heat pumps are most efficient at lower flow temperatures, so radiators feel warm rather than hot. Rooms can still be comfortable, but the heating works more gently and steadily than a boiler. Some people find this takes getting used to, and the house may take longer to warm up from cold.

How to reduce it: keep the heating running steadily rather than switching it on and off, use weather compensation, and make sure the design flow temperature is based on a proper heat loss calculation. See how a heat pump works for why lower temperatures matter.

Will I need to replace my radiators?

Possibly some of them. Because the water is cooler, a radiator gives out less heat than it would with a boiler. Rooms with small radiators may need larger ones, or types with more surface area. Narrow microbore pipework can also limit flow in some systems.

How to reduce it: a room-by-room heat loss calculation will show exactly which radiators are short of output, rather than guessing. Often only some rooms need changes. Improving insulation in those rooms can reduce the need further. See what size heat pump do I need?

Are air source heat pumps noisy?

The outdoor unit makes a fan and compressor hum while it runs, and some extra sounds during defrost cycles. Modern units are designed to be quiet, but placement matters. A unit in an echoey corner, close to a bedroom window or a neighbour's patio, or on a poor mounting, can be more noticeable. [CHECK: permitted development noise requirements, with official source].

How to reduce it: agree the location carefully, avoid enclosed corners, use proper anti-vibration mounts, and keep the area around the unit clear. If you notice new or louder noises, read our noise and defrost fault guide.

Why do some heat pumps perform badly?

This is the disadvantage that worries people most, and the most avoidable. Poor performance is usually caused by the design or the system rather than the technology. Typical causes include an oversized or undersized unit, radiators that are too small, controls that are set up badly, and a dirty existing heating system.

Most UK heat pumps are retrofits onto old radiators and pipework. Sludge, magnetite and debris that a boiler tolerated can restrict flow through a heat pump, leading to low flow rate alarms, cold radiators, short cycling and error codes.

How to reduce it: insist on a proper heat loss calculation, ask what flow temperature the design assumes, and make sure the system is thoroughly cleaned before the heat pump is connected. Cleaning removes an avoidable cause of problems, but it will not fix a system that is undersized or poorly designed, so you need both. Read before you install for what to ask for.

Can running costs be higher than expected?

Yes, if the system runs at a high flow temperature, has restricted flow, short cycles, or relies on electric backup heat. Electricity prices also change over time, which affects the comparison with gas.

How to reduce it: follow the steps in our running costs guide, check tariff options, and ask the installer to review settings if bills look high. For current prices, see the Ofgem energy price cap.

Do the disadvantages outweigh the benefits?

For many homes, no, provided the system is designed and prepared properly. For some, the honest answer is that a heat pump is not the right choice yet. Our guide is a heat pump worth it? sets out both sides, and the Energy Saving Trust offers further independent advice.

Frequently asked questions

What are the main air source heat pump disadvantages?

Higher upfront cost, space for the unit and cylinder, cooler radiators, some outdoor noise, and poor performance if the design or existing system is not right.

Do heat pumps struggle in cold weather?

They work in cold weather but efficiency falls as it gets colder. A correctly sized system is designed to cope with your area's cold days.

How long do heat pumps last?

Lifespan depends on the unit, installation quality, water quality and maintenance. [CHECK: typical expected lifespan, with source].

Can a dirty heating system damage a heat pump?

Sludge and debris can restrict flow, block filters and foul heat exchangers, causing faults and poor performance. See low flow rate and before you install.

Will cleaning my system fix a badly designed heat pump?

No. Cleaning removes sludge and debris, but it cannot correct an undersized radiator, unsuitable pipework or a wrongly sized unit. Good design and a clean system are both needed.

Talk to PowDer Flush before you fit a heat pump

Planning a heat pump on an older system, or chasing a fault on a recent install? Call PowDer Flush for straightforward advice about cleaning the system first. Read our before you install guide for the full picture.

Central heating system cleaning by PowDer Flush Call 07418 608497