What affects how much a heat pump costs to install?
Two homes on the same street can receive very different quotes. That is not always a sign that one installer is wrong. The price reflects the work your particular home needs. The main factors are:
- Property size and heat loss. A larger or less insulated home loses more heat and needs a bigger heat pump and more radiator capacity. The heat loss calculation drives almost everything else.
- Unit size and type. The capacity in kW, and whether it is air source or ground source, affects the price significantly. See what size heat pump do I need?
- Hot water cylinder. If you have a combi boiler, you will need a cylinder and a place to put it. Even with an existing cylinder, it may not be suitable for a heat pump.
- Radiator upgrades. Some radiators may need to be larger to deliver enough heat at lower flow temperatures.
- Pipework. Undersized or microbore pipework may need replacing in places to carry enough flow.
- System cleaning. An old system full of sludge and magnetite should be cleaned before the heat pump is connected.
- Electrical work. The supply and consumer unit may need checking or upgrading.
- Access and location. Difficult access, long pipe runs to the outdoor unit, or a base and mounting work all add time.
What does a heat pump cost breakdown look like?
The table below lists the cost items that commonly appear in a quote. We have left every price as a placeholder because figures vary by region and change over time. Use it as a checklist when comparing quotes: if one quote is much lower, check whether items are missing rather than simply cheaper.
| Cost item | What it covers | Price range |
|---|---|---|
| Survey and heat loss calculation | Room-by-room assessment and system design | [CHECK: price range] |
| Heat pump unit | Outdoor unit (air source) or indoor unit and ground loop (ground source) | [CHECK: price range] |
| Hot water cylinder | Heat pump compatible cylinder and fittings | [CHECK: price range] |
| Radiator upgrades | Replacing selected radiators with larger ones | [CHECK: price range per radiator] |
| Pipework changes | Upsizing pipes, new runs to the unit and cylinder | [CHECK: price range] |
| System cleaning | Cleaning sludge and debris from the existing system before connection | [CHECK: price range] |
| Controls and filter | Thermostats, controller, magnetic filter or strainer | [CHECK: price range] |
| Electrical work | Supply, isolators and any consumer unit changes | [CHECK: price range] |
| Removal of old boiler | Decommissioning and disposal, including any oil tank | [CHECK: price range] |
| Labour and commissioning | Installation, commissioning, handover and registration | [CHECK: price range] |
Total before any grant: [CHECK: typical installed cost range]. For independent context on costs, the Energy Saving Trust publishes general guidance that is updated over time.
How much does the grant reduce the cost?
In England and Wales, the Boiler Upgrade Scheme can provide a grant towards a heat pump installation for eligible properties. The installer applies on your behalf and the grant is taken off your bill. Current amount: [CHECK: current grant amount and eligibility].
Grant rules change, so always confirm the latest details on the official Boiler Upgrade Scheme page on GOV.UK before you sign anything. Our guide who is eligible for a heat pump grant? explains how the scheme works in general terms and where to look in Scotland and Northern Ireland.
Why can skipping a system clean cost more later?
Most UK heat pumps are retrofits onto existing radiators and pipework. Years of running on a boiler can leave that system full of sludge, magnetite and debris. A boiler running hot in short bursts often coped. A heat pump runs cooler for longer and needs more water moving through the system, so the same dirt can cause low flow rate errors, cold radiators and repeat call-outs.
Fixing these problems after the heat pump is in can mean extra visits, cleaning a live system, replacing blocked filters or components, and a period of high electricity use while the system underperforms. Cleaning before installation is usually much simpler. It will not fix an undersized radiator or a poor design, but it removes an avoidable cause. Ask every installer how they will clean the system, and read before you install for what a proper clean involves.
How do I compare heat pump quotes fairly?
Ask each installer to quote against the same list of items, and to show their heat loss calculation, the design flow temperature and which radiators they plan to change. A quote that seems much cheaper may be based on a smaller unit, fewer radiator changes or no system cleaning. Our advice for homeowners includes questions to ask, and is a heat pump worth it? helps you weigh up the decision as a whole.
Frequently asked questions
How much is an air source heat pump in the UK?
Installed costs vary with the home and the work involved: [CHECK: typical installed cost range]. Check the latest independent guidance from the Energy Saving Trust and confirm grant support on GOV.UK.
How much does it cost to install a heat pump with the grant?
Subtract the current Boiler Upgrade Scheme grant, [CHECK: current grant amount and eligibility], from your installer's quote. Confirm the amount on the GOV.UK page.
Why do heat pump quotes vary so much?
Quotes differ in unit size, radiator and pipework changes, cylinder, cleaning and labour. Compare them item by item rather than on the total alone.
Is a ground source heat pump more expensive than air source?
Usually yes, because of the ground loop or borehole work. See how a ground source heat pump works.
Should system cleaning be included in my heat pump quote?
It is sensible to ask. Cleaning the existing system before connection helps protect flow and performance. See before you install.
Talk to PowDer Flush before you fit a heat pump
Planning a heat pump on an older system, or chasing a fault on a recent install? Call PowDer Flush for straightforward advice about cleaning the system first. Read our before you install guide for the full picture.
Related pages
Before You Install
Why an old system should be properly cleaned before a heat pump is connected.
Read moreHeat pump grants
The Boiler Upgrade Scheme in general terms, who can apply and how the installer claims.
Read moreHeat pump running costs
How efficiency, tariffs, heat loss and setup decide what you pay, with a worked method.
Read moreIs a heat pump worth it?
An honest view of when a heat pump makes sense, with a pros and cons table.
Read more