Looking for the Heat Pump Federation? The Heat Pump Federation has merged into Heat Pump Association UK (HPA UK). This website is independent and is not connected to the Heat Pump Federation or HPA UK. Find out more

Heat pump guides

What is a heat pump?

A heat pump is an electric heating system that moves heat from the outside air or the ground into your home, rather than making heat by burning fuel. In the UK it usually heats water for your radiators or underfloor heating and for your hot water cylinder, doing the job a gas or oil boiler would normally do.

A plain-English introduction for homeowners who keep hearing about heat pumps and want to understand the basics before talking to an installer.

What does a heat pump do?

A heat pump collects low-grade heat from outside, concentrates it, and releases it inside your home at a useful temperature. Even air that feels cold to us still contains heat energy, and so does the ground a metre or so below the surface. The heat pump uses electricity to run a compressor and fans or pumps, but most of the heat it delivers comes from the surroundings rather than from the electricity itself.

That is the key difference from almost every other heating system you may have owned. A gas boiler, an oil boiler, an electric storage heater and an open fire all create heat by burning or converting fuel. A heat pump mostly moves heat that already exists. The same principle is used every day in your fridge, which moves heat out of the food compartment and releases it at the back of the appliance. A heat pump does the reverse for a building.

Because it moves heat rather than making it, a well-designed heat pump can deliver more heat energy than the electrical energy it uses. How much more depends on the design, the weather and the water temperature it is asked to produce. We explain that in our guide on how a heat pump works.

What are the main types of heat pump?

Heat pumps are usually described by where they take heat from and what they deliver it into. The common types you will come across in UK homes are:

  • Air source heat pumps. An outdoor unit with a large fan draws air across a heat exchanger. This is by far the most common type in UK retrofits because it needs relatively little outdoor space. See our air source heat pump guide.
  • Ground source heat pumps. Pipes buried in trenches or drilled boreholes collect heat from the ground. They need more space and groundwork but the ground temperature is steadier through the year. See how a ground source heat pump works.
  • Water source heat pumps. Less common, these take heat from a lake, river or other body of water where permission and access allow.
  • Air-to-water. Heat is delivered into water that circulates through radiators, underfloor heating and a hot water cylinder. This is what most people mean by a heat pump replacing a boiler.
  • Air-to-air. Heat is delivered directly as warm air through indoor fan units, similar to air conditioning. These do not normally provide hot water and work quite differently from a wet central heating system.

This site concentrates on air-to-water and ground source systems connected to wet central heating, because that is where most homeowner questions and most retrofit problems arise.

How is a heat pump different from a gas boiler?

Both systems heat water and pump it around your radiators, so from the inside of your home the difference can look small. In practice there are several important changes.

Heat pump and gas boiler compared at a general level
Gas boilerHeat pump
How heat is producedBurns gasMoves heat from air or ground using electricity
Typical water temperatureHigher, radiators feel hotLower, radiators feel warm for longer
How it runsShort bursts of high outputLong, steady periods at lower output
Hot waterOften instant from a combiUsually stored in a cylinder
Outdoor equipmentFlue onlyOutdoor unit or ground loop
Sensitivity to dirty water and low flowTolerates moreMuch more sensitive

Why the last row matters. A heat pump is usually connected to the radiators and pipework that served the old boiler. Sludge and magnetite in that system can restrict flow and reduce heat output. Read before you install to see what a proper clean involves.

The lower water temperature is the change most people notice. A heat pump is designed to keep the house at a steady temperature, so rooms feel comfortable even though the radiators are only warm to the touch. Some radiators may need to be larger to deliver enough heat at that lower temperature, which is something the installer's heat loss calculation will show.

What can a heat pump heat?

An air-to-water or ground source heat pump can supply three things in a typical home.

Radiators. Many homes keep most of their existing radiators. Some may be upsized or swapped for types with more surface area so they can deliver enough heat at a lower flow temperature. The pipework that feeds them also matters, because a heat pump needs a good flow rate through the whole system.

Underfloor heating. Underfloor heating suits heat pumps well because it uses a large warm surface and naturally runs at low temperatures. It is common in extensions and new builds, and sometimes used on ground floors in retrofits.

Hot water. Most heat pump installations include a hot water cylinder, because a heat pump is not designed to heat water instantly like a combi boiler. If you currently have a combi, you will need to find space for a cylinder, which is often the biggest practical change indoors. Our guide on what a heat pump looks like shows the indoor and outdoor parts.

Could a heat pump work in my home?

Many more homes are suitable than people expect, including older houses, provided the system is designed properly. Suitability depends mostly on how much heat your home loses, whether the radiators can deliver enough heat at lower temperatures, and whether there is space for the outdoor unit and a cylinder.

Good insulation and draught-proofing help but do not need to be perfect. The important thing is a room-by-room heat loss calculation, which tells the installer what size heat pump you need and which radiators need changing. If you want to weigh up costs and benefits, read is a heat pump worth it? and how much does a heat pump cost?

Before any installer visits, it helps to note which rooms are hard to heat now, whether radiators have cold patches, and whether the system has had sludge problems. Those clues point to an old system that may need cleaning. Our cold radiators and poor heat fault guide explains why these problems often follow a system onto a new heat pump if nobody deals with them first.

Frequently asked questions

What's a heat pump in simple terms?

It is an electric heating system that moves heat from outside into your home instead of burning fuel, a bit like a fridge working in reverse.

Does a heat pump work in cold UK winters?

Yes. There is still usable heat in cold air and in the ground. Output and efficiency change with the weather, which is why correct sizing matters. See how a heat pump works.

Can a heat pump provide hot water as well as heating?

Yes. Air-to-water and ground source systems normally heat a hot water cylinder as well as radiators or underfloor heating. Air-to-air systems usually do not provide hot water.

Can I keep my existing radiators with a heat pump?

Often many can stay, but some may need to be larger. The heat loss calculation decides this. The old system should also be cleaned so sludge does not restrict flow, as explained in before you install.

Is a heat pump the same as air conditioning?

They use the same basic refrigeration principle. An air-to-air heat pump is very similar to air conditioning, but most UK home heat pumps heat water for radiators and a cylinder instead.

Talk to PowDer Flush before you fit a heat pump

Planning a heat pump on an older system, or chasing a fault on a recent install? Call PowDer Flush for straightforward advice about cleaning the system first. Read our before you install guide for the full picture.

Central heating system cleaning by PowDer Flush Call 07418 608497