Looking for the Heat Pump Federation? The Heat Pump Federation has merged into Heat Pump Association UK (HPA UK). This website is independent and is not connected to the Heat Pump Federation or HPA UK. Find out more

Heat pump guide

Do you need bigger radiators for a heat pump?

Not always. Because heat pumps run at lower flow temperatures, each radiator gives out less heat than it did with a boiler, so some rooms may need larger or extra radiators. Others can keep their existing radiators if a room-by-room heat loss calculation shows they are big enough. Any radiator being reused should be clean, because sludge cuts its output.

Radiator upgrades are one of the most talked-about parts of a heat pump installation. Here is how to understand what your installer is recommending, and why radiator condition matters as much as size.

Why do heat pumps need bigger radiators?

A radiator's heat output depends on the difference between the water temperature and the room temperature. Boilers have traditionally run hot water, so radiators were sized to suit. A heat pump runs most efficiently with cooler water, which narrows that difference and reduces the heat each radiator gives out.

To deliver the same heat with cooler water, a room needs more radiator surface: a larger radiator, a deeper one with more panels and fins, or an additional radiator. That is why upgrades are often recommended in rooms that need the most heat.

How is radiator heat output worked out for a heat pump?

Manufacturers publish radiator outputs at a standard test condition. At lower water temperatures, the output is lower, and installers use correction factors or manufacturer data to work out what each radiator will deliver at the design flow temperature: [CHECK: correction factor method and data from radiator manufacturer, with source].

The installer then compares that output with each room's heat loss on a cold design day. If the radiator can meet the heat loss, it can stay. If not, it needs upgrading, or the room's heat loss needs reducing. MCS publishes the standards certified installers work to: [CHECK: MCS wording on emitter sizing + source link].

When can existing radiators stay with a heat pump?

Existing radiators can often stay where:

  • The room's heat loss is low, for example a well-insulated bedroom.
  • The radiator is already generously sized, perhaps a double panel with fins.
  • Insulation improvements have reduced the room's heat loss.
  • The design flow temperature chosen allows enough output.
  • The radiator is in good condition, not corroded or leaking, and is clean inside.

Mixed outcomes are common: some radiators stay, some are replaced, and the system is designed around the combination.

Why does cleaning matter if radiators are being reused?

The output calculation assumes a clean radiator. In reality, decades-old steel radiators often have sludge settled in their lower channels, reducing the area that gives off heat. A radiator that passes the calculation on paper can fall short in practice, and the usual reaction is to raise the flow temperature, which costs efficiency. See flow temperature too high.

Sludge also leaves the radiators and travels to the heat pump's strainer and filter. Cleaning reused radiators as part of a whole-system clean protects both their output and the heat pump. We recommend PowDer Flush; see cleaning radiators before a heat pump for detail.

What types of radiator work best with heat pumps?

Most standard steel panel radiators work with heat pumps, provided they are sized correctly. Double panel radiators with convector fins give more output for the same wall space than single panels. Some manufacturers market low-temperature or fan-assisted radiators for heat pumps; whether they suit your home is a design question. Underfloor heating is another option where floors are being replaced. We do not recommend particular brands or products.

Do bigger radiators need more flow?

Delivering more heat to a room generally means more water passing through its radiator. A bigger radiator on a pipe that cannot carry the flow it needs will not reach its potential. That is why radiator decisions and pipe decisions go together, particularly on microbore. See what pipe size does a heat pump need? and microbore flow rates explained.

What is involved in changing radiators for a heat pump?

Swapping a radiator usually means draining part or all of the system, removing the old radiator, fitting new brackets and valves, and sometimes altering the pipe connections if the new radiator is a different size. Larger radiators can affect furniture layout, curtains and window boards, so it is worth discussing positions with your installer early.

Because the system is being drained anyway, radiator changes are a natural time to clean the rest of the system, so new radiators are not filled with sludge from the old ones. Costs vary by home and product, and we do not publish figures: [CHECK: typical cost range from current quotes].

If you are reusing some radiators and replacing others, ask your installer to confirm that the whole system, including the radiators being kept, will be cleaned before the heat pump is connected.

What should you ask your installer about radiators?

Ask for the room-by-room heat loss, the design flow temperature, and the calculated output of each existing radiator at that temperature. Ask which radiators will be replaced and why, whether the pipework to them will change, and how retained radiators will be cleaned. Read before you install for the full list of questions.

Frequently asked questions

Do I need bigger radiators for a heat pump?

Possibly in some rooms. It depends on each room's heat loss and the design flow temperature. Your installer's calculation decides.

Can I keep my existing radiators with a heat pump?

Often some of them, if they are large enough for their rooms at the design temperature and are clean and in good condition.

How is heat pump radiator sizing calculated?

By comparing each room's heat loss with the radiator's output at the design flow temperature: [CHECK: correction factor data from radiator manufacturer].

Do dirty radiators affect heat pump performance?

Yes. Sludge reduces output and can block strainers and filters. Clean reused radiators before connection.

Are double panel radiators better for heat pumps?

They give more output for the same wall space, which often helps. The right choice depends on the design.

Talk to PowDer Flush before you fit a heat pump

Planning a heat pump on an older system, or chasing a fault on a recent install? Call PowDer Flush for straightforward advice about cleaning the system first. Read our before you install guide for the full picture.

Central heating system cleaning by PowDer Flush Call 07418 608497