Looking for the Heat Pump Federation? The Heat Pump Federation has merged into Heat Pump Association UK (HPA UK). This website is independent and is not connected to the Heat Pump Federation or HPA UK. Find out more

Guides

Heat Pump Guides

These guides answer the questions UK homeowners most often ask before choosing a heat pump: what it is, how it works, what it costs to fit and run, what size you need and who can get a grant. Each one gives a short answer first, then the detail, in plain English and without a sales pitch.

Written for people preparing a retrofit onto an existing home, radiators and pipework, not for a brochure.

01

What is a heat pump?

What a heat pump does, the main types, and how it differs from a gas boiler.

Read the guide
02

How does a heat pump work?

The refrigerant cycle in four steps, COP explained, and why flow matters.

Read the guide
03

What is an air source heat pump and how does it work?

The outdoor unit, cylinder and radiators, monobloc vs split, and what a retrofit involves.

Read the guide
04

How does a ground source heat pump work?

Trenches vs boreholes, space needed, and when ground source suits a home better.

Read the guide
05

How much does a heat pump cost?

What drives the installed price, a cost breakdown, grants and the hidden costs people forget.

Read the guide
06

How much does a heat pump cost to run?

How efficiency, tariffs, heat loss and setup decide what you pay, with a worked method.

Read the guide
07

Is a heat pump worth it?

An honest view of when a heat pump makes sense, with a pros and cons table.

Read the guide
08

What are the disadvantages of a heat pump?

An honest list of the downsides, and how to reduce or avoid each one.

Read the guide
09

What does a heat pump look like?

Labelled illustrations of the outdoor unit, indoor parts and ground source equipment.

Read the guide
10

What size heat pump do I need?

Why sizing comes from a heat loss calculation, and the risks of getting it wrong.

Read the guide
11

Who is eligible for a heat pump grant?

The Boiler Upgrade Scheme in general terms, who can apply and how the installer claims.

Read the guide
12

What pipe size does a heat pump need?

Primary versus radiator pipework, why sizing depends on the heat loss design, and how blockages make small pipes worse.

Read the guide
13

Can a one-pipe heating system work with a heat pump?

What a one-pipe system is, why it is a challenge for a heat pump, and the options to consider.

Read the guide
14

Do you need bigger radiators for a heat pump?

Lower flow temperatures, heat output, when existing radiators can stay and why cleaning them matters.

Read the guide

How should I use these guides?

If you are just starting out, read the guides roughly in the order they appear above. What is a heat pump? and How does a heat pump work? explain the basic idea. The guides on air source and ground source heat pumps then describe the two main types you are likely to be offered in the UK.

Once you understand the technology, the money questions make more sense. How much does a heat pump cost?, How much does a heat pump cost to run? and Who is eligible for a heat pump grant? explain what drives the numbers. We deliberately do not publish prices, grant amounts or efficiency figures that change over time. Where a figure would normally appear, you will see a clearly marked placeholder and a link to an official source such as GOV.UK, Ofgem or the Energy Saving Trust.

Finally, Is a heat pump worth it? and What are the disadvantages of a heat pump? give a balanced view, and What size heat pump do I need? explains what a proper survey should look like.

Why do these guides keep mentioning the existing heating system?

Most heat pumps fitted in UK homes are retrofits. The heat pump replaces a boiler, but it usually connects to radiators and pipework that have been in place for many years. That old system may contain sludge, magnetite and debris that a boiler tolerated but a heat pump will not.

Heat pumps run at lower water temperatures and depend on a steady, healthy flow of water through the system. When an old system is dirty, the result can be low flow rate alarms, cold radiators and higher running costs. That is why our before you install guide sits alongside these guides. It is not the only thing that matters, and cleaning will not fix a poor design, but it is one of the easiest problems to prevent.

Who writes these guides?

Heat Pump Faults is an independent information website. We do not sell heat pumps and we do not recommend particular manufacturers or energy suppliers. The guides are written to help you ask better questions and compare quotes fairly, not to push you towards a decision.

Every home is different, so treat these pages as background reading rather than a design. Your installer should carry out a proper survey and heat loss calculation, and you should always check the latest official guidance before making a financial decision.

Where can I check official figures?

Prices, tariffs and grant rules change. These official sources are the best place to confirm current details:

Frequently asked questions

Are these guides written by a heat pump installer?

No. Heat Pump Faults is an independent information site. We do not sell or install heat pumps, and we do not recommend particular manufacturers or suppliers.

Why do the guides contain [CHECK] placeholders instead of prices?

Prices, grant amounts, tariffs and efficiency figures change, and we would rather show nothing than show something wrong. Each placeholder sits next to a link to an official source where you can find the current figure.

Which guide should I read first?

Start with What is a heat pump?, then Is a heat pump worth it? for a balanced view before you look at costs.

Do the guides cover Scotland and Northern Ireland?

The general explanations apply across the UK. Grant schemes differ by nation, so check the official schemes for where you live. Our grants guide points to the right places.

Talk to PowDer Flush before you fit a heat pump

Planning a heat pump on an older system, or chasing a fault on a recent install? Call PowDer Flush for straightforward advice about cleaning the system first. Read our before you install guide for the full picture.

Central heating system cleaning by PowDer Flush Call 07418 608497